Consult International Marine’s INTERTUF DATA SHEET brochure on NauticExpo. Page: 1/4. Intertuf Aluminium. A one pack, tar free vinyl anticorrosive which can be used at temperatures down to -5°C. Packaging: 20L. Documents. Interuf__eng. International Intertuff Vinyl Anticorrosive. A one pack, tar free vinyl anticorrosive which can be used at temperatures down to -5°C (23°F). As an anticorrosive.
|Published (Last):||14 April 2006|
|PDF File Size:||18.74 Mb|
|ePub File Size:||16.60 Mb|
|Price:||Free* [*Free Regsitration Required]|
Subject to reinspection thereafter. Thoroughly flush all equipment with International GTA Use International GTA only in exceptional circumstances. All surfaces to integtuf coated should be clean, dry and free from contamination.
VOC values are typical and are provided for guidance purposes only. Read and follow all precautionary notices on the Material Safety Data Sheet and container labels. This material is a one pack coating and should always be mixed thoroughly with a power agitator before application. Proper ventilation and protective measures must be provided during application and drying to keep solvent vapour concentrations within safe limits and to protect against toxic or oxygen deficient hazards.
Prior to use, obtain, consult and follow the Material Safety Data Sheet for this product concerning health and safety information. Apply in good weather. Technical and application data herein is for the purpose of establishing a general guideline of the coating application procedures. Overcoating information is given for guidance only and is subject to regional variation depending upon local climate and environmental conditions.
Take precautions to avoid skin and eye contact ie. Actual safety measures are dependant on application methods and work environment. In the event welding or flame cutting is performed on metal coated with this product, dust and fumes will be emitted which will require the use of appropriate personal protective equipment and adequate local exhaust ventilation. All unused material should be stored in tightly closed containers.
These may be subject to variation depending on factors such as differences in color and normal manufacturing tolerances.
INTERTUF DATA SHEET – International Marine – PDF Catalogs | Documentation | Boating Brochures
All surfaces to be coated should be clean, dry and free from contamination. Test performance results were obtained in a controlled laboratory environment and International Paint makes interyuf claim that the exhibited published test results, or any other tests, accurately represent results found in all field environments. Open the catalog to page 3. Consult your local International Paint representative for specific recommendations.
If oxidation has occurred between blasting and application of Intertufthe surface should be reblasted to the specified visual standard. Where necessary, remove weld spatter and smooth weld seams and sharp edges. Consult your International Paint representative for specific recommendations. Vinyl Anticorrosive Optimum performance is achieved when Intertuf is applied over blasted steel. For blasted areas, the primer should be applied before oxidation occurs. As an anticorrosive for both above and below the waterline and also as a sealer coat over Tributyltin TBT antifoulings.
Intretuf in accordance with the standard Worldwide Marine Specifications.
If you do not fully understand these warnings and instructions or if you can not strictly comply with them, do not use this product. Vinyl Anticorrosive Airless Spray Conventional Spray This material is a one pack coating and should always be mixed thoroughly with a power agitator before Not recommended. Apply intertuc good weather. IntertufJVA aluminium must be specified as the first coat in an anticorrosive system. Consult your International Paint representative for details.
Petersburg, Russia, phone: Optimum performance is achieved when Intertuf jntertuf applied over blasted steel.
Intertuf Aluminium | Primers | Marine Paints | Products | Anicla Distribuciones
High pressure fresh water wash or fresh water wash, as appropriate, and remove all oil or grease, soluble contaminants and other foreign matter in accordance with SSPC-SP1 solvent cleaning.
DO NOT thin more than allowed by local environmental legislation. VOC values are typical and are provided for guidance purposes only. DO NOT thin more than allowed by local environmental legislation. Weld seams and damaged areas should be prepared to the specified standard eg.
These may be subject to variation depending on factors such as differences in colour and normal manufacturing tolerances. IntertufJVA aluminium must be specified inteertuf the first coat in an anticorrosive system.
Long term testing is ongoing. Unmixed material in closed containers should be maintained in protected storage in accordance with information given in the STORAGE Section of this data sheet.